The STIs should have a hidden Allen screw under the break hood. You will see a indent on the plastic right above where the rubber hood sits. You do this from the top side of the lever housing. I forget the size Allen, but you can slide it underneath the hood and wiggle a little to catch the Allen bolt in there. If you can't seem to find it, roll up the hood and you will be able to see it's location. Once you know where it is you'll be fine, it just seems hard for me to explain it. So I hope I was clear enough.
allen screw under hood
MR is right. I just put ultegra on one bike and dura ace on another
on mine you undo the brakes so the cable goes slack, and that lets you remove the hood and then get to the clamp with a little screwdriver. you know that all shimano stuff has tech docs on the web? also, i reckon bikeforums.net or sheldon brown (search on google) are prolly better for qs like these.
g'luck!
What they said. Go here and you can look at the parts diagrams and installation instructions for most components: http://techdocs.shimano.com/techdocs/index.jsp
================================================================
Special offer: Free Domain & cPanel Hosting for only $2.99 at https://SecureSignup.net !
================================================================
Spam Filtered (ID:3479677)
ไม่มีความคิดเห็น:
แสดงความคิดเห็น