PLEASE HELP ME!! How do you change the gear shift on a 2007 Chrysler 300?

Ya I want to change the ''Head'' of the gear shift you know the part you grasp to change gears.. ex: Park, Reverse, Neutral, Drive

I heard its either by a ''Allen Wrench'' or you twist it off like a top off of a bottle.. Which is it??

You did not give engine size? This instructions are for a v6

REMOVAL

WARNING: Before servicing the steering column the airbag system must be disarmed. Failure to do so may result in accidental deployment of the airbag and possible personal injury.

1. Disconnect the negative (ground) cable from the battery.

2. Remove the steering column opening cover.

3. Remove the steering column opening reinforcement (1).

4. Disconnect the AutoStick wiring connector (1).

5. Remove the wiring tie strap (2) securing the AutoStick wiring to the column

6. Unsnap the gear shift lever boot (2) from the cluster bezel (3). Slide the boot up the gear shift lever (1), away from the bezel.

7. Remove the gear shift lever mounting screw (1).

8. Slide the gear shift lever (2) out of the column shift mechanism and remove the lever with AutoStick wiring.

================================================================
Special offer: Free Domain & cPanel Hosting for only $2.99 at https://SecureSignup.net !
================================================================

Spam Filtered (ID:3479677)